MC-CAM
Presentations
2002:
“High performance electrophosphorescent LEDs based on non-conjugated polymer”
presented by Alan Heeger at the
Materials Research Society meeting,
“Polymer based electrophosphorescent LEDs”
presented by Alan Heeger, ICSM,
“Controlled Non-morphology of Nanoparticles and Conducting Single-crystal films”
presented by Norma Alcantar, American Institute of Chemical Engineers meeting, November 2002.
“Stabilized Blue Emission from Polyfluorene-based Light Emitting Diodes: Elimination of Fluorenone Defects”
presented by Xiong Gong at the MRS
Meeting,
2003:
“Fabrication of cobalt nanocrystals in inverse PS-PVP micelles by rapid pyrolysis and heat treatment,”
presented by Seung-Heon Lee at the American Physical Society meeting, March 2003.
“Self-assembly of nanoparticles into periodic nanopatterns,”
presented by Seung-Heon Lee at the American Physical Society meeting, March 2003.
“High-performance PLEDs by novel hole injection polymer layer”
presented by Alan Heeger at the American Physical Society meeting, March 2003.
“Multilayer structures of polyelectrolytes and nanoparticles based on layer-by-layer (LBL) assembly and Langmuir Blodgett deposition,”
presented by Geoffrey Lowman at the American Chemical Society meeting, March 2003.
“Development and Benefits of Disordered Microsphere Assemblies for Use as Templates,”
presented by Nathan Mitchell at the
Materials Research Society Spring Meeting, April 2003.
“Improved Hybrid Optical Coatings: Polymethylmethacrylate Crosslinked by Silsesquioxane,”
presented by John Harreld at the Materials Research Society Spring Meeting, April 2003.
“Excitation energy transfer from polyfuorene to fluorenone defects”
presented by Xiong Gong at the MRS
meeting,
“Structure Directing in Organosilsesquioxane Hybrid Materials: PPSQ Resins and PMMA-SSQ IPN,”
presented by John Harreld at the NANO 2003 conference, May 2003.
“Polymer composites for light-emitting diodes”
presented by Alan Heeger at the SPIE annual meeting,
“Block-Type Copolymers of Ethylene and Polar Monomers,”
presented by Steve Diamanti at the Advances in Polyolefins conference, August 2003.
2004:
“Thermo-mechanical properties of semicrystalline sPP-EPR diblock and sPP-EPR-sPP triblock copolymers,”
presented by Atsushi Hotta at the Materials Research Outreach Program and the American Physical Society meeting, January 2004.
“Block Copolymers of Ethylene and Functional,”
presented by Steve Diamanti at the Materials Research Outreach Program, UCSB, January 2004.
Encapsulation of ZnS:Mn2+ Nanoclusters with PS-PVP Diblock
Copolymer,
presented by Sangcheol Kim at the Materials Research Outreach
Program, UCSB, January 2004.
“NMR Analysis of Surfaces and Interfaces in CdSe Nanocrystals,”
presented by Mia Berretinni at the American Chemical Society meeting, March 2004.
“Fluorescence and atomic force microscopy studies of polyelectrolyte, CdSe nanoparticle heterostructres,”
presented by Asanga Ranasinghe at the
American Chemical Society meeting, March 2004.
“Transparent PMMA-SiO2-TiO2 Nanocomposites for Optical Applications,”
presented by Wenbin Hong at the American Chemical Society meeting in March 2004, and at the Materials Research Society meeting in April 2004.
“White electrophosphorescence from polymer blends”
presented by Alan Heeger,
ICSM,
“Structural characterization of InGaP nanocrystals by solid-state NMR technique,”
presented at the American Chemical Society Meeting, authors Berrittini, Raab, Gerbec, Chmelka, and Strouse, August 2004.
“Size-Dependent Structural Analysis of CdSe Nanocrystals Through Solid-State 77Se NMR,”
presented by Mia Berrettini at the NMR conference, ISMAR, October 2004.
“Colloidal quantum dots for white
light generation,”
presented by
2005:
“Multilayer Polymer Light-Emitting Diodes: White Emission with High Efficiency,”
presented by Alan Heeger at the American
Physical Society Meeting in
“Encapsulation of ZnS:Mn2+ Nanoclusters with PS-PVP Diblock
Copolymer,”
presented by Sangcheol Kim at the American Physical Society Meeting, March 2005.
“Mixed-metal Nanoparticles for Fuel Cell Catalysis”
presented by Tom Jaramillo at the American Chemical Society National Meeting, March 2005.
“Investigation of Electrochemically Co-deposited PT-WO3 Catalysts towards Methanol Electro-Oxidation,”
presented by Sudha Jayaraman at the American Chemical Society National Meeting, March 2005.
“Structure
of Poly(vinylpyrrolidone)-Silica-Phosphoric
Acid Composites and Applications in Intermediate Temperature Fuel Cells,”
presented by Wenbin Hong at the Materials Research
Society
Meeting, March 2005.
“Low Voltage aqueous electrodeposition of hydroxylated fullerene thin films,”
presented by Alan Kleiman at the Electrochemical Society meeting,
“Time-Resolved Studies of Fluorescence and Band-Edge Charge Carrier Dynamics in InxGa1-xP Colloidal Quantum Dots,”
presented by Alexander Mikhailovsky
and
“Thermal and Mechanical Properties of Gradient Copolymers containing
Ethylene and 5-Norbornen-2yl Acetate,”
presented by Atsushi Hotta at the American
Chemical Society Meeting, August 28, 2005.
“Tapered Tetrablock Copolymers of Ethylene and
5-Norbornen-2-yl acetate Using a Novel Two Component
Ni Initiator System”
presented by Robert Coffin at the Pacifichem 2005 Meeting,
2006
“Semi-crystalline
polyolefin-based block copolymers for thermoplastic elastomers”
presented by Ed Kramer at the International Conference
on Deformation, Yield and Fracture of Polymers,
“Photonic
Crystal-Assisted Light Extraction from Colloidal Quantum Dots/GaN Hybrid Structures”
presented by
“Hopping
Transport and Voltage Induced Metal-Insulator Transition in Polythiophene
Field Effect Transistors”
presented by Anoop Dhoot at the 2006 Spring MRS
Meeting,
“Polyethylene
Clay Nanocomposites Generated by In Situ
Polymerization”
presented by Brian Peoples at the CIMAT
"Frontiers in Materials Research III” workshop,
“Catalytic
Routes to Polyolefin Nanocomposite Materias”
presented by Susannah Scott at the
2007
“Polyethylene
Clay Nanocomposites Generated by In Situ
Polymerization”
presented by Brian Peoples at the 2007 Materials
Research Outreach Program poster session, UCSB, January 25, 2007.
“Structure-property
correlations in Ce-doped garnet phosphors for use in
solid-state lighting”
presented by Gautam Gundiah at the 2007 Materials
Research Outreach Program poster session, UCSB, January 25, 2007.
“Catalytic
Routes to Polyolefin Nanocomposite Materials”
presented by Susannah Scott at the 2007 Materials
Research Outreach Program, UCSB, January 26, 2007.
“Activation of Polymerization Catalysts By
Interaction With Oxide Surfaces”
presented by Susannah Scott at the Gordon Research
Conference,
“Relationship
between mechanical properties and chain architectures of semicrystalline
thermoplastic elastomeric triblock polyolefins”
presented by Zhigang
Wang at the APS meeting,
“Nano-Engineered Particles
by Emulsion Polymerization”
presented by Zesheng An at the MRS Spring Meeting,
“Long Lifetime Polymer Light-emitting
Electrochemical Cells”
presented by Yan Shao at the MRS Spring Meeting,
“Enhanced Thermal Stability of PE/clay Nanocomposites”
presented by Bryanna Kunkel at the ICMR sponsored Brazil-US workshop,
Polyethylene
Clay Nanocomposites Generated by In Situ
Polymerization”
presented by Brian Peoples at the ICMR sponsored Brazil-US workshop,
“Catalytic
Routes to Polyolefin Nanocomposite Materials”
presented by Susannah Scott at the ICMR sponsored Brazil-US workshop,
“Novel
red phosphors based on vanadate garnets for solid
state lighting applications”
presented by Gautam Gundiah at the ICMR International
Symposium on Synthesis and Functional Oxide Materials, UCSB, August 20, 2007
“Structure-property
correlations in Ce-doped garnet phosphors for use in
solid-state lighting”
presented by Gautam Gundiah at the Electrochemical
Society Meeting,
“Thiol-Ene "Click" Chemistry: Materials
for Soft Lithography, Hydrogels, and Polymer Functionalization”
presented by Luis Campos at the American Chemical
Society Meeting,
2008
“Semicrystalline Polyolefin Block Copolymer Elastomers and Gels”
presented by Ed Kramer at the 2008 Materials
Research Outreach Program, UCSB, February 5-7, 2008.
“Semicrystalline Polyolefin Block Copolymer Elastomers and Gels”
presented by Ed Kramer at the 2008 DSM Young
Scientists Day, UCSB, June 4, 2008.
“Clay-Supported
Catalysts for Ethylene Polymerization and Copolymerization”
presented by Mabel Caipa at the Gordon Conference,
“Photocurable Thio-lene Polymers
for Soft Lithography”
presented by Jeffrey Yamada at the 2008 US-Japan
POLYMAT Summit,
2009
“Nano-porous Poly(3-hexylthiophene)
Films:
presented by Tirtha Chatterjee at the 2009 Materials Research Outreach Program, UCSB, February 3, 2009.
“Cytop(TM) as a passivation layer for plastic electronic devices"
presented
by Jimmy Granstrom at the 2009 Materials Research Outreach Program
poster session, UCSB, February 3, 2009
“Nickel catalysts for ethylene polymerization supported on and activated by clay"
presented by Susannah Scott at the ACS meeting in
“Rough Poly(3-hexylthiophene)
films: A novel route to prepare bulk heterojunction
photovoltaic devices”
presented by Tirtha Chatterjee at the 2009
APS March Meeting, Pittsburgh, Pennsylvania, March 18, 2009.
“Step Cycle Deformation Processing of Elastomers and Gels Based on Semicrystalline
Polyolefin-based Block Copolymers”
presented by Fanny Deplace at the 2009 APS March
Meeting,
“Processing-Structure-Mechanical Property
Relationships of Semicrystalline Polyolefin-based
Block Copolymers”
presented by Fanny Deplace at the International
Conference on Deformation, Yield, and Fracture of Polymers,
"Low-cost encapsulation of plastic electronic
devices"
presented by Jimmy Granstrom at the
Nordic Polymer Days,
"Organic light-emitting diodes encapsulated with
nitrogen spacers between intermittent free-standing barrier films"
presented by Jimmy Granstrom at the
Nordic Polymer Days poster session,
“Semicrystalline
Polyolefin-Based Block Copolymers: A New Class of Thermoplastic Elastomers”
presented by Ed Kramer at P&G, July 17,
2009.
“a-Keto-b-Diimine Complexes of Nickel and Palladium as Catalysts for
Olefin Polymerization”
presented by Jason Azoulay at the 2009 ACS National
Meeting,
“Preparation of Functionalized Polyethylene
Materials Using a Combination of Coordination Insertion and Atom Transfer
Radical Polymerizations”
presented by Yanika Schneider at the 2009 ACS National
Meeting,